My company has the advanced team and technology, fusion technology in Italy and Europe standard, combining the domestic production technology, formation of pineapple juice, canned pineapple, pineapple juice, canned pineapple production plan, and can according to enterprise's investment conditions and production practice, provide one-stop service to the customer's project: Including engineering design, supporting, installation, commissioning and technical, operation training, to provide customers with turnkey projects.

Ingredients: Fresh pineapple

Terminal products: NFC pineapple juice, concentrated pineapple juice, pineapple juice drink, NFC pineapple juice, concentrated pineapple juice, pineapple juice drink

Processing capacity: 10~1500T/ day

Jam ingredients: pure fruit juice, concentrated juice, fruit juice drinks.

Sterilization method: pasteurization, UHT ultra high temperature instantaneous sterilization, aseptic sterilization. (Adjustable according to requirements)

Terminal packaging: aseptic bucket, aseptic bag in box, tinplate small packaging, small bag packaging, glass bottle packaging, plastic bottle packaging.

Control mode: manual control or automatic control can be used for less than 300 tons.

System composition: lifting system, cleaning system, sorting system, peeling and extracting system, filtration system, vacuum concentration system (for concentrated juice), mixing system (for juice drinks), sterilization system, aseptic large bag filling system, small packaging system

Product features:

1. The pineapple juice processing equipment of the company is reasonable and beautiful in design, stable in operation, energy saving and low in steam consumption.

2. Pineapple juice adopts special peeling and juice extraction system, which can reach 20T/H per unit.

3. The enrichment system adopts automatic falling film evaporator, special fruit juice, milk and other liquid better materials used for the enrichment and materials from the top of the heater to join first, after a liquid distributor evenly into heater within the heat exchange tube, and then in under the action of gravity and vacuum induced force and air flow, homogeneous membrane along the inner wall of the heat exchange tube shed, in the process of flow, By shell side of heating medium boiler steam heating evaporation, the steam produced together with the liquid into the separator, and then carried out within the separator gas-liquid separation, steam rising into the condenser is condensed into liquid (single-effect operation) by condensation water collection, while after the separation of liquid from the bottom of the separator, finally be concentrate. In multi-effect evaporator, the secondary steam generated by one effect heater can enter the next effect heater as heating medium and get heat energy utilization, so as to achieve the purpose of saving energy consumption.

4. The evaporator evaporation temperature is low, heat is fully utilized, pineapple juice is heated gently, evenly heated in the tube, high heat transfer coefficient, can prevent the phenomenon of "dry wall".

5. The condenser with special structure can run normally under the condition of cooling water temperature of 30℃ or even higher.

6. Continuous feed in and out, feed liquid level and required concentration can achieve automatic control.

7. Adopt aseptic sterilization + aseptic filling to ensure the asepsis of the material, so that it can be kept warm for 1-2 years at room temperature.

Bromelain treatment equipment can be added as required.